Colums custom manufacturing of travertine olivillo

In this work we performed was to make a personalized custom 7 columns olivillo travertine marble with honed finish.

The total height of the pillars were of 225 cm and a diameter of 25 cm shaft and buckling; that is, the shaft is wider at its middle.

A special feature of this order is that we specific client who wanted us to send you the columns already assembled at the factory. Normally the columns are made in three parts (stem, base and capital) separately to then be assembled on site. This is not a problem because sometimes other customers have asked us; you just have to take special care when palletizing columns for shipping, so they are very protected to prevent possible incidents during transport.

In this case these columns were sent to Alava, and drawers were made to measures for the protection of the columns during transport.

Here you have some photos of the entire process of manufacturing to palletising prior to the transmission of natural stone columns customer in Alava.








www.artesaniadelmarmol.es

Comments

Popular posts from this blog

TERRACOTTA FLOOR RECOVERY OF EXTERIOR WITH LINAZA OIL TREATMENT

WORK RESTORATION OF ANTIC TERRACOTTA FLOOR

Cleaning and treatment of terracotta floor in solarium with mold problems in several areas